Comments on: How to seam seal your Lanshan Pro tent https://3fulgear.com/2021/10/13/how-to-seal-your-tent/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-seal-your-tent 3F UL GEAR official online store, ultralight tent, ultralight backpack Tue, 04 Mar 2025 03:21:04 +0000 hourly 1 https://wordpress.org/?v=6.8.1 By: 3FULGEAR https://3fulgear.com/2021/10/13/how-to-seal-your-tent/#comment-69237 Tue, 25 Feb 2025 06:25:01 +0000 https://3fulgear.com/?p=41856#comment-69237 In reply to chmd.

It can only be removed by physical methods and then sealed with new glue.

]]> By: chmd https://3fulgear.com/2021/10/13/how-to-seal-your-tent/#comment-58133 Mon, 17 Jun 2024 14:25:49 +0000 https://3fulgear.com/?p=41856#comment-58133 I successfully followed this process 2 years ago. Unfortunately the seam has poorly aged, and is starting to peel off.

What is your recommendation if I want to remove the old seam sealant and replace it with a fresh coat? More specifically, how do would you recommend I remove the old seam sealant? I used GearAid SeamGrip (as per your recommendation).

]]> By: 3FULGEAR https://3fulgear.com/2021/10/13/how-to-seal-your-tent/#comment-42094 Thu, 14 Sep 2023 07:33:23 +0000 https://3fulgear.com/?p=41856#comment-42094 In reply to Denis.

“Kafuter” made good silicone sealant.

]]> By: Denis https://3fulgear.com/2021/10/13/how-to-seal-your-tent/#comment-38416 Sun, 09 Jul 2023 20:18:02 +0000 https://3fulgear.com/?p=41856#comment-38416 What silicone (glue) can I buy on AliExpress?

]]> By: 3FULGEAR https://3fulgear.com/2021/10/13/how-to-seal-your-tent/#comment-34276 Fri, 05 May 2023 08:10:51 +0000 https://3fulgear.com/?p=41856#comment-34276 In reply to Fritz.

There is usually no need to reseal, unless you find a leak.

]]> By: 3FULGEAR https://3fulgear.com/2021/10/13/how-to-seal-your-tent/#comment-34275 Fri, 05 May 2023 08:10:10 +0000 https://3fulgear.com/?p=41856#comment-34275 In reply to Al.

Now we don’t recommend applying with your fingers on the outside, which can make the tent unsightly, but when sealing on the inside, you can apply with your fingers or a brush. For exterior sealing, use a syringe along the seam line.
The white grid of UHMWPE is UHMWPE, and the black part is Nylon. The white grid has very high strength, just like the steel bars in a skyscraper.

]]> By: 3FULGEAR https://3fulgear.com/2021/10/13/how-to-seal-your-tent/#comment-34274 Fri, 05 May 2023 08:02:25 +0000 https://3fulgear.com/?p=41856#comment-34274 In reply to Davide.

Sure, in our recommendation, this part needs to be sealed from both inside and outside.

]]> By: Fritz https://3fulgear.com/2021/10/13/how-to-seal-your-tent/#comment-27394 Tue, 29 Nov 2022 05:33:02 +0000 https://3fulgear.com/?p=41856#comment-27394 once applied do I have to reapply?
thanks,

]]> By: Al https://3fulgear.com/2021/10/13/how-to-seal-your-tent/#comment-26138 Wed, 26 Oct 2022 21:43:46 +0000 https://3fulgear.com/?p=41856#comment-26138 Hi,
So the UHMPWE patch is the black patch with the white grids on it?
When you said smear it with your finger, is it all over the entire patch or just over the seam?
I can’t tell what the guy did on the instruction video because of the angle from where the video was shot during that scene. I could only see the back of his hand.
I’m just really nervous since it’s my first time trying to do this and want to make sure I do it right.
Thank you.

]]> By: Davide https://3fulgear.com/2021/10/13/how-to-seal-your-tent/#comment-20463 Thu, 30 Jun 2022 07:07:26 +0000 https://3fulgear.com/?p=41856#comment-20463 I was in my Lanshan 2 Pro under heavy showers last night. I realised it slightly leaks from the two tie outs.

Here’s a pic to clarify what I need with tie out: https://3fulgear.com/wp-content/uploads/2021/10/WX20211013-222620@2x-1140×445.png

I have already done seam sealing two times in that areas, and tested with a hose,so I thought it would be ok.

Should I apply sealant also on the inside?

]]>